Specification IKO Alignment Table AT | Mechatronics Series

Maximum carrying mass

Maximum carrying mass ?

The table below shows the Maximum carrying mass.Consult IKO when considering using the product under loads exceeding Maximum carrying mass.

Maximum carrying mass ?

Model and size	Carrying mass position mm	Maximum carrying mass　Kg
	Carrying mass position mm	Length　L Horizontal direction				Length　L Vertical direction
	Height　H	0	100	200	300	0	100	200	300
AT120	0	22	22	22	22	22	22	22	22
	100	22	22	22	22	22	22	22	22
	200	22	22	22	22	22	22	22	22
	300	22	22	22	22	16	16	16	16
AT200	0	12	12	12	12	12	12	12	12
	100	12	12	12	12	12	12	12	12
	200	12	12	12	12	12	12	12	12
	300	12	12	12	12	12	12	12	12
AT300	0	44	44	44	44	44	44	44	44
	100	44	44	44	44	44	44	44	44
	200	44	44	44	44	44	44	44	44
	300	44	44	44	44	44	44	44	44

Remark:

The maximum carrying mass is adjusted by the mass when the rating life of the linear motion rolling guide, ball screws, or bearings is 18,000 hours during continuous operation at a number of revolutions of the motor of 3000min-1 and an acceleration/deceleration time of 0.2s. The mass calculated is based upon the basic static load rating of the linear motion rolling guide.

Product Related Inquiries

Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.

AT Features

Alignment Table AT is a rotary positioning mechanism for precision angular adjustment which consists of a high rigidity steel table and bed assembled using an IKO Crossed Roller Bearing as a table support bearing.
Alignment Table AT converts linear motion produced by ball screw drive into rotary motion as specified by angular position. Linear Way type L is assembled as a linear motion rolling guide in the ball screw drive mechanism and serves to achieve high accuracy positioning in combination with the precision ball screw.