Accuracy
The table below shows the accuracy of AM specifications.
Accuracy
unit: mm
| Model and size | Stroke length(1) |
length of track rail |
Positioning repeatability(1) |
Positioning accuracy(1) |
Parallelism in motion B |
Backlash(1) |
|---|---|---|---|---|---|---|
| AM25 | 30 | 130 | ±0.002 | 0.020 | 0.008 | 0.003 |
| AM40 | 30 | 180 | ||||
| AM60 | 90 | 290 | ||||
| AM86 | 120 | 390 |
| Note(1) | Not applicable to "Without ball screw" specification. |
Maximum speed
The table below shows the maximum speeds for various AM specs.Consult IKO when considering using at speeds exceeding the maximum speed.
Maximum speed
| Model and size | Ball screw lead mm |
Maximum speed mm/s |
|
|---|---|---|---|
| AM25 | 4 | 200 | |
| AM40 | AM60 | 5 | 250 |
| AM86 | |||
| Remark: | To measure the practical maximum speed, it is required to consider operation patterns based on the motor to be used and load conditions. |
Maximum carrying mass
The table below shows the Maximum carrying mass.Consult IKO when considering using the product under loads exceeding Maximum carrying mass.
Maximum carrying mass
| Model and size | Carrying mass position mm |
Maximum carrying mass Kg | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Length L Horizontal direction |
Length L Vertical direction |
||||||||
| Height H | 0 | 100 | 200 | 300 | 0 | 100 | 200 | 300 | |
| AM25 | 0 | 11 | 1.2 | 0.6 | 0.4 | 4.6 | 0.4 | 0.2 | 0.1 |
| 100 | 6 | 1.1 | 0.6 | 0.4 | 0.6 | 0.3 | 0.2 | 0.1 | |
| 200 | 3.7 | 1.0 | 0.6 | 0.4 | 0.3 | 0.2 | 0.1 | 0.1 | |
| 300 | 2.6 | 0.9 | 0.5 | 0.4 | 0.2 | 0.1 | 0.1 | 0.1 | |
| AM40 | 0 | 39 | 11 | 5 | 4.0 | 10 | 4.9 | 2.5 | 1.7 |
| 100 | 39 | 9 | 5 | 3.9 | 4.6 | 3.0 | 2.0 | 1.4 | |
| 200 | 25 | 8 | 5 | 3.7 | 2.4 | 1.9 | 1.5 | 1.2 | |
| 300 | 18 | 7 | 4.9 | 3.5 | 1.6 | 1.4 | 1.2 | 1.0 | |
| AM60 | 0 | 88 | 30 | 16 | 11 | 13 | 13 | 8 | 5 |
| 100 | 88 | 27 | 15 | 11 | 13 | 9 | 6 | 4.6 | |
| 200 | 59 | 23 | 14 | 10 | 7 | 6 | 4.9 | 3.9 | |
| 300 | 44 | 21 | 13 | 10 | 5 | 4.4 | 3.8 | 3.3 | |
| AM86 | 0 | 210 | 93 | 52 | 36 | 23 | 23 | 23 | 21 |
| 100 | 210 | 84 | 49 | 35 | 23 | 23 | 23 | 17 | |
| 200 | 192 | 76 | 47 | 34 | 23 | 22 | 19 | 15 | |
| 300 | 150 | 69 | 44 | 32 | 20 | 17 | 14 | 13 | |
| Remark: | The maximum carrying mass is adjusted by the mass when the rating life of the linear motion rolling guide, ball screws, or bearings is 18,000 hours during continuous operation at a number of revolutions of the motor of 3000min-1 and an acceleration/deceleration time of 0.2s. The mass calculated is based upon the basic static load rating of the linear motion rolling guide. |
Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.
