Specification｜IKO Precision Positioning Table L TSL･･･M | Mechatronics Series

Accuracy

The table below shows the accuracy of TSL specifications.

Accuracy

unit: mm

Model and size	Stroke length	Positioning repeatability	Positioning accuracy	Parallelism in table motion B	Backlash
TSL 90 M	50	±0.002	0.015	0.020	0.003
	100		0.020	0.030
	150		0.020
	200		0.025
	250		0.025
	300		0.030	0.040
TSL120 M	100	±0.002	0.020	0.030	0.003
	150		0.020
	200		0.025
	250		0.025
	300		0.030	0.040
	400		0.040	0.050
	500		0.045	0.050
	600		0.050	0.070
TSL170 M	150	±0.002	0.020	0.030	0.003
	200		0.025
	250		0.025
	300		0.030	0.050
	400		0.040
	500		0.045
TSL170SM TSL220 M	300	±0.002	0.030	0.040	0.003
	400		0.040	0.050
	500		0.045	0.050
	600		0.050	0.070
	800		0.050
	1000		0.060

Maximum speed

The table below shows the maximum speeds for various TSL specs.Consult IKO when considering using at speeds exceeding the maximum speed.

Maximum speed

Motor type	Model and size	Stroke length mm	Maximum speed　mm/s
Motor type	Model and size	Stroke length mm	Lead 5mm	Lead 10mm
AC Servomotor	TSL 90 M	－	500	1000
	TSL120 M	500 or less	370	750
	TSL120 M	600	370	720
	TSL170 M	－	370	750
	TSL170 SM TSL220 M	800 or less	280	560
	TSL170 SM TSL220 M	1000	190	390
Stepper motor	TSL 90 M TSL120 M TSL170 M TSL170 SM TSL220 M	－	150	300

Remark:

To measure the practical maximum speed, it is required to consider operation patterns based on the motor to be used and load conditions.

Maximum carrying mass ?

The table below shows the Maximum carrying mass.Consult IKO when considering using the product under loads exceeding Maximum carrying mass.

Maximum carrying mass ?

Model and size	Ball screw lead mm	Carrying mass position mm	Maximum carrying mass Kg
		Carrying mass position mm	Length　L Horizontal direction				Length　L Vertical direction
		Length　H	0	100	200	300	0	100	200	300
TSL90M	5	0	46	20	11	8	7	7	7	7
		100	46	20	11	8	7	7	7	7
		200	46	20	11	8	7	7	7	7
		300	46	20	11	8	7	7	6	5
	10	0	26	16	9	6	4.7	4.7	4.7	4.7
		100	26	15	9	6	4.7	4.7	4.7	4.7
		200	26	14	8	6	4.7	4.7	4.7	4.7
		300	26	13	8	6	4.7	4.7	4.7	4.4
TSL120M	5	0	195	144	84	59	18	18	18	18
		100	195	143	83	59	18	18	18	18
		200	195	140	83	58	18	18	18	18
		300	195	136	82	58	18	18	18	18
	10	0	97	97	63	44	18	18	18	18
		100	97	97	63	44	18	18	18	18
		200	97	97	61	44	18	18	18	18
		300	97	92	59	43	18	18	18	18
TSL170M	5	0	195	174	104	74	18	18	18	18
		100	195	171	103	74	18	18	18	18
		200	195	166	102	73	18	18	18	18
		300	195	160	101	73	18	18	18	18
	10	0	97	97	78	55	17	17	17	17
		100	97	97	77	55	17	17	17	17
		200	97	97	74	54	17	17	17	17
		300	97	97	70	52	17	17	17	17
TSL170SM	5	0	218	191	117	84	21	21	21	21
		100	218	190	117	84	21	21	21	21
		200	218	188	116	84	21	21	21	21
		300	218	186	116	84	21	21	21	21
	10	0	113	113	90	65	20	20	20	20
		100	113	113	89	64	20	20	20	20
		200	113	113	88	64	20	20	20	20
		300	113	113	86	63	20	20	20	20
TSL220M	5	0	226	226	226	226	19	19	19	19
		100	226	226	226	226	19	19	19	19
		200	226	226	226	226	19	19	19	19
		300	226	226	226	225	19	19	19	19
	10	0	111	111	111	111	18	18	18	18
		100	111	111	111	111	18	18	18	18
		200	111	111	111	111	18	18	18	18
		300	111	111	111	111	18	18	18	18

Remark:

The maximum carrying mass is adjusted by the mass when the rating life of the linear motion rolling guide, ball screws, or bearings is 18,000 hours during continuous operation at a number of revolutions of the motor of 3000min-1 and an acceleration/deceleration time of 0.2s. The mass calculated is based upon the basic static load rating of the linear motion rolling guide.

Product Related Inquiries

Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.

Precision Positioning Table L Features

Precision Positioning Table L is a light weight, long stroke type positioning table in which two rows of high accuracy, high rigidity type IKO Linear Ways are incorporated on a slide table and bed made of high-strength aluminum alloy together with a precision ball screw for the drive mechanism. Parallel arrangement of two sets of Linear Ways achieves stability as well as high running and positional accuracy in addition to high load capacity. Many variations in table sizes and stroke lengths are available. Dedicated XY brackets are also available for this series. Therefore, an assembly such as an X-Y robot can be readily constructed to suit the requirements of each application. With IKO's C-Lube technology integrated in the linear ways, the maintenance work including regreasing of the Linear Ways and the ball screw can be greatly reduced.
This series is widely used and its excellent performance has been verified as a high accuracy positioning mechanism for assembly systems, working machines, measuring instruments, etc.