TE50Dimension｜Precision Positioning Table TE｜Mechatronics Series

Dimension

The dimensions of TE50 are shown below.

TE50BS(Motor inline specification)

unit: mm

Bed length L1	Overall length L	Stroke length S(2)	Mounting holes of bed		Mass（Ref.） Kg(3)
Bed length L1	Overall length L	Stroke length S(2)	C	n	Mass（Ref.） Kg(3)
150	218	60(－)	35	2	0.52
200	268	110(40)	20	3	0.62
250	318	160(90)	45	3	0.72
300	368	210(140)	30	4	0.82
400	468	310(240)	40	5	1.02
500	568	410(340)	10	7	1.22

Notes（1）	Too deep insertion depth of the mounting bolt may affect the running performance of the slide table, so never insert a bolt longer than the depth of the through hole.
（2）	The value indicates the allowable stroke when limit sensors are mounted. The value in （） represents dimension for two slide tables in close contact.
（3）	The value shows the mass of the entire table with one slide table, and it is 0.07kg heavier with two slide tables.
Remarks	Motor attachment for AC servomotor is 3.5mm lower than the bottom of the bed. Motor attachment for stepper motor is 4.5mm lower than the bottom of the bed.

TE50BF(Motor inline specification)

unit: mm

Bed length L1	Overall length L	Stroke length S(1)	Mounting holes of bed		Mass（Ref.） Kg(2)
Bed length L1	Overall length L	Stroke length S(1)	C	n	Mass（Ref.） Kg(2)
150	218	60(－)	35	2	0.65
200	268	110(40)	20	3	0.75
250	318	160(90)	45	3	0.85
300	368	210(140)	30	4	0.94
400	468	310(240)	40	5	1.14
500	568	410(340)	10	7	1.33

Notes（1）	The value indicates the allowable stroke when limit sensors are mounted. The value in （） represents dimension for two slide tables in close contact.
（2）	The value shows the mass of the entire table with one slide table, and it is 0.16kg heavier with two slide tables.
Remarks	Motor attachment for AC servomotor is 3.5mm lower than the bottom of the bed. Motor attachment for stepper motor is 4.5mm lower than the bottom of the bed.

TE50BS(Motor folding back specification)

unit: mm

Bed length L1	Overall length L	Stroke length S(2)	Mounting holes of bed		Mass（Ref.） Kg(3)
Bed length L1	Overall length L	Stroke length S(2)	C	n	Mass（Ref.） Kg(3)
150	177.5	60(－)	35	2	0.72
200	227.5	110(40)	20	3	0.82
250	277.5	160(90)	45	3	0.92
300	327.5	210(140)	30	4	1.02
400	427.5	310(240)	40	5	1.22
500	527.5	410(340)	10	7	1.42

Notes（1）	Too deep insertion depth of the mounting bolt may affect the running performance of the slide table, so never insert a bolt longer than the depth of the through hole.
（2）	The value indicates the allowable stroke when limit sensors are mounted. The value in （） represents dimension for two slide tables in close contact.
（3）	The value shows the mass of the entire table with one slide table, and it is 0.07kg heavier with two slide tables.
Remarks	Parts for motor attachment are appended, and this figure indicates a finished state after assembled by the customer If folded back to right and left, motor attachment is about 9.5mm lower than the bottom of the bed. In addition, it is about 2.5 to 3.5mm lower than the bottom of the bed if AC servomotor is mounted by customers, and about 4.5mm lower if stepper motor is mounted. If folded back upward, motor attachment is about 3.5mm lower than the bottom of the bed.

TE50BF(Motor folding back specification)

unit: mm

Bed length L1	Overall length L	Stroke length S(1)	Mounting holes of bed		Mass（Ref.） Kg(2)
Bed length L1	Overall length L	Stroke length S(1)	C	n	Mass（Ref.） Kg(2)
150	177.5	60(－)	35	2	0.85
200	227.5	110(40)	20	3	0.95
250	277.5	160(90)	45	3	1.05
300	327.5	210(140)	30	4	1.15
400	427.5	310(240)	40	5	1.35
500	527.5	410(340)	10	7	1.55

Notes（1）	The value indicates the allowable stroke when limit sensors are mounted. The value in （） represents dimension for two slide tables in close contact.
（2）	The value shows the mass of the entire table with one slide table, and it is 0.16kg heavier with two slide tables.
Remarks	Parts for motor attachment are appended, and this figure indicates a finished state after assembled by the customer. If folded back to right and left, motor attachment is about 9.5mm lower than the bottom of the bed. In addition, it is about 2.5 to 3.5mm lower than the bottom of the bed if AC servomotor is mounted by customers, and about 4.5mm lower if stepper motor is mounted. If folded back upward, motor attachment is about 3.5mm lower than the bottom of the bed.

Product Related Inquiries

Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.

TE Features

IKO Precision Positioning Table TE is a lightweight and compact positioning table using a high-strength aluminum alloy for its main components with a slide table assembled inside a U-shaped bed. Use of a Precision ball screw for the feeding mechanism guarantees high reliability and high accuracy positioning. The product is long term maintenance free by integrating IKO's C-Lube internal lubrication system within the linear motion rolling guide and ball screw, reducing the frequency of relubrication. Various specifications such as ball screw lead, motor type and sensor mounting can be configured, so that an ideal positioning table can be created according to usage.
Ideal for a wide range of usages from devices requiring high positioning accuracy to general conveying, such as part processing, assembly, inspection and conveying equipment, etc.