Specification｜Precision Positioning Table TS/CT｜Mechatronics Series

Features
Specification
Dimension
- TS
  - TS55/55
  - TS75/75
  - TS125/125
  - TS125/220
  - TS220/220
  - TS220/310
  - TS260/350
- CT
  - CT55/55
  - CT75/75
  - CT125/125
  - CT220/220
  - CT260/350
  - CT350/350
Identification Number

Accuracy

The table below shows the accuracy of TS・CT specifications.

Accuracy

unit: mm

Identification number		Positioning repeatability	Positioning accuracy	Parallelism in table motion A	Parallelism in table motion B	Squareness of XY motion(1)(2)
Single-axis specification	Two-axis specification	Positioning repeatability	Positioning accuracy	Parallelism in table motion A	Parallelism in table motion B	Squareness of XY motion(1)(2)
TS 55/ 55	－	±0.002	0.005	0.005	0.015	0.005
－	CT 55/ 55		0.010
TS 75/ 75	CT 75/ 75		0.005
TS125/125	CT125/125		0.005
TS125/220	－		0.008
TS220/220	CT220/220		0.008
TS220/310	－		0.015	0.008	0.020	0.008
TS260/350	CT260/350
－	CT350/350

Note(1)	Applied to tables with two-axis specification.
Note(2)	Does not include straightness component.

Maximum speed

The table below shows the maximum speeds for various TS・CT specs.Consult IKO when considering using at speeds exceeding the maximum speed.

Maximum speed

Motor type	Maximum speed　mm/s
Motor type	Lead 1mm	Lead 2mm	Lead 5mm
AC servomotor	50	100	250
Stepper motor	30	60	150

Remark:

To measure the practical maximum speed, it is required to consider operation patterns based on the motor to be used and load conditions.

Maximum carrying mass ?

The table below shows the Maximum carrying mass.Consult IKO when considering using the product under loads exceeding Maximum carrying mass.

Maximum carrying mass of TS ?

Model and size	Ball screw lead mm	Carrying mass position mm	Maximum carrying mass Kg
		Carrying mass position mm	Length　L Horizontal direction				Length　L Vertical direction
		Height　H	0	100	200	300	0	100	200	300
TS 55/ 55	1	0	4.3	4.2	2.3	1.6	2.2	0.9	0.5	0.3
		100	4.3	4.2	2.3	1.5	1.1	0.6	0.4	0.3
		200	4.3	4.1	2.2	1.5	0.6	0.4	0.3	0.2
		300	4.3	4.0	2.2	1.5	0.4	0.3	0.2	0.2
TS 75/ 75	1	0	21	21	12	8	1.5	1.5	1.5	1.3
		100	21	21	12	8	1.5	1.5	1.5	1.1
		200	21	20	11	8	1.5	1.5	1.3	1.0
		300	21	20	11	8	1.5	1.2	1.0	0.8
TS125/125	1	0	72	72	59	42	2.3	2.3	2.3	2.3
		100	72	72	57	41	2.3	2.3	2.3	2.3
		200	72	72	55	40	2.3	2.3	2.3	2.3
		300	72	72	54	39	2.3	2.3	2.3	2.3
	2	0	72	72	45	32	11	11	7	5
		100	72	69	42	30	11	10	6	4.7
		200	72	62	40	29	9	6	5	4.1
		300	72	56	37	28	6	5	4.4	3.7
	5	0	72	49	28	20	29	11	5	4.0
		100	72	38	24	18	12	7	4.8	3.5
		200	54	31	21	16	6	5	4.1	3.1
		300	40	26	19	15	4.8	3.9	3.3	2.8
TS125/220	2	0	115	114	67	47	9	9	9	9
		100	115	104	64	46	9	9	9	9
		200	115	96	60	44	9	9	9	8
		300	115	88	57	42	9	9	8	7
	5	0	115	75	44	31	28	21	11	8
		100	115	61	39	29	22	14	9	6
		200	94	51	35	26	12	9	7	6
		300	71	44	31	24	8	7	6	5
TS220/220	2	0	169	169	169	130	3.9	3.9	3.9	3.9
		100	169	169	164	123	3.9	3.9	3.9	3.9
		200	169	169	152	116	3.9	3.9	3.9	3.9
		300	169	169	142	110	3.9	3.9	3.9	3.9
	5	0	169	169	109	80	24	24	20	14
		100	169	134	92	70	24	24	17	12
		200	169	108	79	63	23	17	14	10
		300	129	90	69	56	16	13	11	9
TS220/310	2	0	256	256	256	197	–	–	–	–
		100	256	256	249	187	–	–	–	–
		200	256	256	233	178	–	–	–	–
		300	256	256	218	169	–	–	–	–
	5	0	282	267	169	124	19	19	19	19
		100	282	209	144	110	19	19	19	19
		200	266	170	125	98	19	19	19	18
		300	204	143	110	89	19	19	18	16
TS260/350	2	0	310	310	310	242	–	–	–	–
		100	310	310	305	232	–	–	–	–
		200	310	310	288	222	–	–	–	–
		300	310	310	272	212	–	–	–	–
	5	0	310	310	208	154	18	18	18	18
		100	310	258	181	139	18	18	18	18
		200	310	216	159	126	18	18	18	18
		300	263	185	142	115	18	18	18	18

Remarks

Not operable when the maximum carrying mass is "-".
The maximum carrying mass is adjusted by the mass when the rating life of the linear motion rolling guide, ball screws, or bearings is 18,000 hours during continuous operation at a number of revolutions of the motor of 3000min-1 and an acceleration/deceleration time of 0.2s. The mass calculated is based upon the basic static load rating of the linear motion rolling guide.

Maximum carrying mass of CT ?

Model and size	Ball screw lead mm	Carrying mass position mm	Maximum carrying mass Kg
		Carrying mass position mm	Length　L Horizontal direction				Length　L Vertical direction(1)
		Height　H	0	100	200	300	0	100	200	300
CT55/55	1	0	4.3	4.1	2.2	1.5	2.2	0.9	0.5	0.3
		100	4.3	4.1	2.2	1.5	1.1	0.6	0.4	0.2
		200	4.3	4.0	2.2	1.5	0.6	0.4	0.3	0.2
		300	4.3	3.9	2.2	1.5	0.4	0.3	0.2	0.2
CT75/75	1	0	21	21	12	8	1.5	1.5	1.5	1.2
		100	21	21	11	8	1.5	1.5	1.5	1.1
		200	21	20	11	8	1.5	1.5	1.3	0.9
		300	21	20	11	8	1.4	1.2	1.0	0.8
CT125/125	1	0	72	72	58	41	2.3	2.3	2.3	2.3
		100	72	72	57	40	2.3	2.3	2.3	2.3
		200	72	72	55	39	2.3	2.3	2.3	2.3
		300	72	72	53	39	2.3	2.3	2.3	2.3
	2	0	72	72	44	31	11	11	7	5
		100	72	68	42	30	11	9	6	4.5
		200	72	61	39	29	8	6	5	4.0
		300	72	55	37	27	6	4.9	4.2	3.6
	5	0	72	48	28	20	29	10	5	3.9
		100	72	37	24	18	11	7	4.7	3.4
		200	53	30	21	16	6	4.8	3.8	3.0
		300	39	25	18	14	4.4	3.6	3.0	2.6
CT220/220	2	0	169	169	169	128	3.9	3.9	3.9	3.9
		100	169	169	162	121	3.9	3.9	3.9	3.9
		200	169	169	151	115	3.9	3.9	3.9	3.9
		300	169	169	140	109	3.9	3.9	3.9	3.9
	5	0	169	169	108	78	24	24	20	13
		100	169	132	91	69	24	24	16	12
		200	167	107	78	61	22	16	13	10
		300	127	89	68	55	15	12	10	9
CT260/350	2	0	225	225	225	181	–	–	–	–
		100	225	225	225	173	–	–	–	–
		200	225	225	216	166	–	–	–	–
		300	225	225	204	159	–	–	–	–
	5	0	225	225	151	112	18	18	18	18
		100	225	188	132	101	18	18	18	18
		200	225	158	117	92	18	18	18	17
		300	194	136	104	84	18	18	16	14
CT350/350	2	0	286	286	286	286	–	–	–	–
		100	286	286	286	277	–	–	–	–
		200	286	286	286	262	–	–	–	–
		300	286	286	286	248	–	–	–	–
	5	0	310	310	229	174	14	14	14	14
		100	310	265	194	153	14	14	14	14
		200	309	218	168	137	14	14	14	14
		300	245	184	148	123	14	14	14	14

Note(1)

When the Y-axis moves vertically.

Remarks

Not operable when the maximum carrying mass is "-".
The maximum carrying mass is adjusted by the mass when the rating life of the linear motion rolling guide, ball screws, or bearings is 18,000 hours during continuous operation at a number of revolutions of the motor of 3000min-1 and an acceleration/deceleration time of 0.2s. The mass calculated is based upon the basic static load rating of the linear motion rolling guide.

Product Related Inquiries

Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.

TS・CT Features

TS/CT Compact Series Table is a positioning table which incorporates IKO's Crossed Roller Way, a long established precision type linear motion rolling guide. It is assembled in conjunction with a high rigidity and superior vibration-damping slide table and bed made of cast iron together with a precision ball screw as the drive mechanism. This table achieves a low sectional height, high reliability, and high accuracy by making the most of the features of the compact, high accuracy and high rigidity Crossed Roller Way. Compact Series TS/CT includes a single axis type and also a two axis type and is widely used in applications requiring high accuracy positioning such as precision measuring instruments and systems.